Document ID:	MIL-STD-202       Scroll down to access document images
Spec/Std Sheet:	311

Overview

Title:  Method 311, Life, Low Level Switching Scope:  This test is conducted for the purpose of determining electrical contact reliability under low-level switching conditions in the environment in which the contacts operate. A low level switching circuit is one in which the voltage and stored energy are sufficiently small so that the resistance of a pair of contacts is not affected by electrical phenomena associated with the electrical current flow or the switching. Such a circuit is also one where the voltage or the current is too low to cause any physical change in the contacts; contact resistance can only be affected by changes in the contacts caused by mechanical action on the contacts. Electrical loads, which result in arcing across electrical contacts, affect contact surfaces in many ways, mostly favorable to reduction of contact resistance, since insulating films and small rough raised areas on the contact are burned away or melted down, to reform as a more even and larger contact surface. Under low-level conditions, the advantages, as well as the occasional disadvantages of this arcing will be absent. If low-level loads and intermediate or power loads are to be applied to different pairs of contacts on the same component part simultaneously, reliability of the low-level conditions can be impaired due to deposition of foreign materials resulting from vaporization surrounding the contacts operating at larger loads in the same enclosure or in an adjacent area, because of this fact, and because low-level contacts may develop films as a function of their environment, the contacts are tested in an environment similar to that in which they are used. This test in no way reflects the contact capability in the intermediate or "minimum" current area and shall not be considered as a substitute for testing in this area when specified. Status:  Active Document Date:  22-OCT-2024         Next Review Due:  21-OCT-2029 FSC/Area:  59GP Doc Category:   Military Standard -Test Method Standard

Responsibilities

Lead Standardization Activity:  CC  DLA Weapons Support (Columbus)     Preparing Activity: CC  DLA Weapons Support (Columbus) Coordination:  Full   Army Custodian:  CR   US Army Combat Capabilities Development Command, C5ISR Center   Navy Custodian:  EC   Naval Information Warfare Systems Command   Air Force Custodian:  85   Air Force Life Cycle Management Center - Electronic Components, Wire and Ca   DLA Custodian:  CC   DLA Weapons Support (Columbus)

Changes to military standards or handbooks issued after August 1, 2003 are incorporated in the modified document.

Revision History

Click on column headings for a description of column content.

NOTE: It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance; older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases.