ASSIST
   Data updated: 19 Nov 2026. Document Details

Document ID:  
MIL-STD-202       Scroll down to access document images
Spec/Std Sheet:  302

Overview
Title:  Method 302, Insulation Resistance
Scope:  This test is to measure the resistance offered by the insulating members of a component part to an impressed direct voltage tending to produce a leakage of current through or on the surface of these members. A knowledge of insulation resistance is important, even when the values are comparatively high, as these values may be limiting factors in the design of high-impedance circuits. Low insulation resistances, by permitting the flow of large leakage currents, can disturb the operation of circuits intended to be isolated, for example, by forming feedback loops. Excessive leakage currents can eventually lead to deterioration of the insulation by heating or by direct-current electrolysis. Insulation resistance measurements should not be considered the equivalent of dielectric withstanding voltage or electric breakdown tests. A clean, dry insulation may have a high insulation resistance, and yet possess a mechanical fault that would cause failure in the dielectric withstanding voltage test. Conversely, a dirty, deteriorated insulation with a low insulation resistance might not break down under a high potential. Since insulating members composed of different materials or combinations of materials may have inherently different insulation resistances, the numerical value of measured insulation resistance cannot properly be taken as a direct measure of the degree of cleanliness or absence of deterioration. The test is especially helpful in determining the extent to which insulating properties are affected by deteriorative influences, such as heat, moisture, dirt, oxidation, or loss of volatile materials.
Status:  Active Document Date:  22-OCT-2024
  Next Review Due:  21-OCT-2029
     
59GP Doc Category:   Military Standard -Test Method Standard
 

Responsibilities
Lead Standardization Activity:  CC  DLA Weapons Support (Columbus)  
  Preparing Activity: CC  DLA Weapons Support (Columbus)
Coordination:  Full  
Army Custodian:  CR   US Army Combat Capabilities Development Command, C5ISR Center  
Navy Custodian:  EC   Naval Information Warfare Systems Command  
Air Force Custodian:  85   Air Force Life Cycle Management Center - Electronic Components, Wire and Ca  
DLA Custodian:  CC   DLA Weapons Support (Columbus)  

Changes to military standards or handbooks issued after August 1, 2003 are incorporated in the modified document.
Revision History Click on column headings for a description of column content.
MediaDocument Part DescriptionDist StmtDocument DatePagesSize
Document ImageNotice 2 - ValidationA22-OCT-202412.0 KB
Document ImageNotice 1 - ValidationA21-JAN-202012.0 KB
Document ImageBase Document A18-APR-2015645.8 KB

NOTE: It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance; older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases.


  About Quick Search  |  ASSIST  |  Privacy and Security  |  Section 508 Compliance  |  Defense Standardization Program  

WARNING: UNAUTHORIZED ACCESS TO THIS UNITED STATES GOVERNMENT COMPUTER SYSTEM AND SOFTWARE IS PROHIBITED BY PUBLIC LAW 99-474 (THE COMPUTER FRAUD AND ABUSE ACT OF 1986) AND CAN RESULT IN ADMINISTRATIVE, DISCIPLINARY OR CRIMINAL PROCEEDINGS.